Key takeaways
- Homeowners who want automatic, whole- or partial-house backup power should look at a standby generator professionally installed to run on natural gas or…
Homeowners who want automatic, whole- or partial-house backup power should look at a standby generator professionally installed to run on natural gas or propane, while anyone who only needs occasional, movable backup power should instead consider a dual-fuel portable generator that can switch between gasoline and propane; the right choice depends mainly on whether the goal is automatic whole-home coverage or flexible, lower-cost occasional use.
Quick Picks at a Glance
| Type | Best For | Key Stated Specs | Limits |
|---|---|---|---|
| Standby home generator (natural gas or propane, auto-start) | Whole or partial home backup, automatic operation during outages | Makers list output in the 7,000-26,000W range, automatic transfer switch, weekly self-test cycle | Requires professional installation, a dedicated fuel line or propane tank, and local permitting in most areas |
| Portable dual-fuel generator (gasoline/propane) | Occasional outages, camping, job sites | Makers state output on each fuel separately; propane often rated slightly lower than gasoline | Manual start and fuel switching; no automatic transfer unless paired with a manual transfer switch |
| Propane-only portable generator | Buyers who prefer propane’s longer storage life over gasoline | Runs on standard propane tanks; makers list runtime per tank size | Output typically a bit lower than gasoline-only equivalents; tank swapping needed for extended runtime |
| Natural-gas-only standby unit | Homes already on a natural gas utility line | Continuous fuel supply from the gas line, no on-site fuel storage needed | Dependent on utility gas service remaining available during the outage event |
Natural Gas vs. Propane: What Actually Differs
Fuel Supply and Storage
A natural-gas-fed standby generator draws continuously from the home’s existing gas utility line, so there is no on-site tank to monitor or refill, but this also means the generator depends on the gas utility staying operational, which can be a consideration during widespread disasters that affect utility infrastructure. Propane-fed units draw from an on-site tank, commonly a 100-500 gallon tank for standby generators or smaller portable cylinders for portable units, which gives independence from the gas utility but requires monitoring tank level and arranging refills, especially before hurricane season or winter storm season in areas prone to extended outages.
Output Differences
Makers commonly state a slightly lower power output rating when a given generator runs on propane compared to the same unit running on natural gas or gasoline, due to differences in the fuel’s energy density. This difference is usually modest but worth checking against the specific loads planned, particularly for a standby unit sized close to a home’s actual demand.
Installation Requirements
Standby generators require a licensed electrician for the automatic transfer switch and typically a licensed gas contractor or plumber for the fuel line connection, plus a concrete or composite pad per the maker’s installation manual. Local permits and inspections are required in most jurisdictions, and placement must meet the maker’s stated clearances from windows, doors, and vents.
Safety and Code Considerations
All standby and portable generators burning natural gas or propane produce carbon monoxide, and the U.S. Consumer Product Safety Commission along with generator makers recommend carbon monoxide alarms be installed inside the home regardless of fuel type or generator placement. Standby units must be sited per the maker’s manual and local code, with minimum clearances from windows, doors, soffit vents, and property lines; some jurisdictions also require clearance from combustible materials for the enclosure itself. Any gas line work should be done by a licensed professional, since an improperly sealed connection creates both a fire and carbon monoxide risk; this is not a project suited to shortcuts or bypassing a permit process. For portable units, follow the same outdoor-only placement rules used for gasoline models, and never attempt to connect a generator to household wiring without a properly installed transfer switch.
Pick This If…
| Situation | Suggested Option |
|---|---|
| Want automatic whole-home backup with no manual startup | Standby generator sized to the home’s load, installed by licensed electrical and gas contractors |
| Home already has a natural gas utility connection | Natural-gas-fed standby unit, avoiding on-site fuel storage |
| Home is on well water or in an area where utility gas may also fail | Propane-fed standby unit with an adequately sized on-site tank |
| Only need occasional, movable backup power | Portable dual-fuel generator, kept with both gasoline and a spare propane tank on hand |
| Fuel storage life matters more than minor output differences | Propane-only portable generator, since propane stores far longer than gasoline without degrading |
Ongoing Maintenance for Standby and Portable Units
Standby generators typically come with a maintenance contract option or a manufacturer-recommended service schedule covering oil changes, filter replacement, and battery checks for the automatic starting system, and following this schedule matters more for standby units than portable ones since they are expected to start reliably without warning, often after sitting idle for months. The weekly self-test cycle most standby units run is a useful early warning sign; a failed self-test should prompt a service call rather than being ignored until the next actual outage.
For portable dual-fuel units, switching between gasoline and propane operation according to the maker’s instructions, rather than guessing at the process, avoids fuel system issues, and checking propane hose connections for leaks before each use remains good practice regardless of unit type. Homeowners with a propane tank for either a standby or portable setup should also track tank level proactively ahead of forecasted severe weather, since propane suppliers can see high demand and delivery delays during widespread storm events.
Alternatives Worth Considering
- Battery/solar backup systems: no combustion, no fuel logistics, and can be used indoors, though whole-home coverage requires a larger and more expensive battery bank than many households install.
- Gasoline-only portable generators: lower upfront cost than dual-fuel units for buyers who do not need fuel flexibility and can reliably access gasoline during an outage.
- Manual transfer switch with a portable generator: a lower-cost middle ground between a fully automatic standby system and simply running extension cords, still requiring a licensed electrician for installation.
Frequently Asked Questions
Do I need a permit to install a standby generator?
Most jurisdictions require permits for both the electrical transfer switch and the gas line connection, and some require a separate inspection for the generator pad placement and clearances. A licensed installer familiar with local code is the best source for the exact requirements in a given area.
Is propane or natural gas better for a home standby generator?
Neither is universally better; natural gas offers uninterrupted fuel supply as long as the utility is operating, while propane offers independence from the gas utility but requires monitoring and refilling an on-site tank. The choice often comes down to whether natural gas service is already available at the home and how often the local utility experiences outages that could affect gas supply too.
How is a standby generator sized for a home?
Installers typically calculate total running and starting watts for the circuits the homeowner wants backed up, which may be the whole house or a partial set of essential circuits, then recommend a generator model and transfer switch configuration to match. This sizing is generally best done by the installing contractor rather than estimated by the homeowner alone.
Can a natural gas generator run if the power grid is down but gas service continues?
Yes, this is the typical scenario standby generators are designed for, since home natural gas lines do not require electricity to deliver fuel in most residential setups. However, during some large-scale disasters gas utility service can also be interrupted, which is a reason some homeowners choose propane for added independence.
How often should a standby generator be tested?
Most standby generators include an automatic self-test feature that runs the unit briefly on a set schedule, commonly weekly, to confirm it will start when needed; makers’ manuals detail the exact test cycle and any manual maintenance checks recommended between professional services.
What should I do if I smell gas near a generator or fuel line?
Leave the area immediately, avoid operating any switches or open flames nearby, and contact the gas utility or a licensed professional right away rather than attempting to diagnose or fix the issue personally. This applies to both standby installations and portable propane setups.
Related articles
- Best Clean Power Portable Generators: Picks and What to Look For (2026)
- Best High Gas Pressure Switch: Picks and What to Look For (2026)
- Best Combustible Gas Indicator Cgi: Picks and What to Look For (2026)
- Best Solar Power Box Fan: Picks and What to Look For (2026)
- Best Wheel Suitcases: Picks and What to Look For (2026)
- Best Indoor Plant Stands for Living Rooms: Picks and What to Look For (2026)