Updated Nov 18, 2026· 7 min read

Key takeaways

  • Reptile and amphibian keepers who need a basic full-spectrum heat and light source should look at a combination incandescent UVA bulb, while anyone…

Reptile and amphibian keepers who need a basic full-spectrum heat and light source should look at a combination incandescent UVA bulb, while anyone keeping a species with a documented UVB requirement, such as most diurnal lizards and tortoises, needs a dedicated linear or compact fluorescent UVB tube rated for their enclosure size. The right choice depends less on brand and more on which UV output band the animal actually needs, how far the bulb sits from the basking spot, and how often the bulb gets replaced.

Quick Picks at a Glance

Type Best For Key Stated Specs Limits
Linear T5 HO UVB fluorescent tube Tortoises, bearded dragons, uromastyx, large vivariums Makers typically list UVB output in the 5-14% range with a stated effective distance of 12-18 inches; needs a dedicated T5 fixture Fixture and reflector add bulk and cost; output drops sharply with distance and glass/mesh filtering
Compact fluorescent UVB bulb Smaller terrariums, geckos, small lizards Screw-in base, stated UVB percentage usually 5-10%, fits standard dome fixtures Narrower spread of UV than linear tubes; some keepers report uneven coverage at tank ends
Combination UVA/heat basking bulb Species needing warmth plus visible/UVA light, supplemental use Incandescent or halogen, produces heat and visible light; makers generally do not rate these for meaningful UVB Not a substitute for UVB where a species requires it; heat output must be checked against enclosure size
Mercury vapor bulb Large enclosures needing heat, UVA and UVB from one fixture Makers list combined heat/UVA/UVB output and a stated wattage range Runs hot, fixed output cannot be dimmed, mounting height is critical to avoid overexposure

What UVA and UVB Actually Do

UVA light influences feeding behavior, basking activity, and in some species breeding behavior, since many reptiles can see into the UVA range humans cannot. UVB light is what many reptiles use to synthesize vitamin D3 in the skin, which in turn supports calcium metabolism. The two are not interchangeable, and a bulb that produces strong visible and UVA light is not automatically producing usable UVB. Reptile veterinarians and herpetological societies generally recommend checking a species-specific care sheet before assuming a given animal needs supplemental UVB at all; some nocturnal or nearly-nocturnal species have lower or negligible documented requirements.

Reading the Manufacturer’s Output Numbers

Makers commonly print a percentage figure on UVB tubes, such as 5%, 7%, or 10%, which roughly corresponds to low, medium, and high output tiers intended for shade-dwelling, partial-sun, and full-sun baskers respectively. These percentages are only meaningful at the distance and through the mesh or screen type the maker tested with; a 10% tube mounted too far away or behind glass can deliver far less usable UVB than the label implies. Because UV output is invisible and hard to judge by eye, several keepers and herpetological groups recommend a separate UV index meter for anyone keeping UVB-dependent species long term, since bulb output also degrades over months of use even when the bulb still produces visible light.

Fixture and Mounting Compatibility

Linear T5 and T8 tubes require a fixture built for that tube length and ballast type; a tube pulled from a hardware-store shop light will not match the UV-transmitting glass or reflector a reptile-specific fixture uses. Compact and screw-in bulbs fit standard dome or clamp fixtures but should be checked against the dome’s maximum rated wattage, since some domes are rated only for lower-wattage bulbs. Any UV bulb should be mounted so the basking animal cannot climb close enough to contact it, both to prevent burns and to avoid overexposure to UV at very short range.

Replacement Schedule and Degradation

Most UVB bulb makers state that output drops meaningfully well before the bulb burns out, with many linear tubes rated for roughly six to twelve months of effective UVB output depending on the product line, even though the bulb may keep producing visible light for much longer. Compact UVB bulbs are frequently rated for shorter effective periods than linear tubes. Keepers who cannot test output directly are generally advised by care guides to follow the printed replacement interval rather than wait for visible dimming, since UVB degradation is not something the human eye can detect.

Pick This If…

Situation Suggested Option
Tortoise, uromastyx, or other full-sun basking species in a large enclosure Linear T5 HO UVB tube sized to the enclosure length, mounted per the maker’s stated distance
Bearded dragon or similar in a mid-size vertical or horizontal tank Mid-output (around 10%) compact or T5 UVB bulb with a basking branch positioned at the maker’s stated effective distance
Small gecko species with a lower documented UVB need Low-output (around 5%) compact UVB bulb, or species care sheet guidance on whether UVB is needed at all
Keeper wants heat plus visible light only, UVB handled separately A basic basking incandescent or halogen bulb, paired with a dedicated UVB tube rather than relying on it for UV
Large bioactive enclosure needing heat and UV from one unit Mercury vapor bulb mounted at the maker’s stated minimum safe height

Common Setup Mistakes to Avoid

One frequent mistake is buying a UVB bulb based only on wattage rather than the maker’s stated UVB percentage, since wattage mainly describes heat output and says little about UV strength. Another common issue is leaving a UVB tube in place well past its effective output window simply because it still produces visible light; without a UV meter, a calendar reminder tied to the maker’s stated replacement interval is a more reliable approach than judging by eye. Placing the bulb behind glass or a tight mesh screen is also a common oversight that can silently cut UVB delivery far below what the label implies, even with a brand-new bulb.

Some keepers also mix bulb types incorrectly, for example pairing a high-output UVB tube meant for full-sun desert species with an enclosure built for a shade-dwelling species, which can lead to overexposure. Checking the species’ documented UV index needs against the bulb’s stated output and the planned mounting distance before purchase avoids this mismatch. Finally, skipping a secure guard or cage around heat-emitting bulbs mounted within an animal’s climbing range is a preventable cause of burns, and most fixture makers sell or recommend a compatible guard for this reason.

Alternatives and Related Gear Worth Considering

  • Mesh screen toppers: some mesh types filter out a meaningful share of UVB before it reaches the animal; several keepers switch to glass or acrylic UV-transparent panels to reduce this loss.
  • Digital UV index meters: a one-time accessory that lets a keeper measure actual UVB reaching the basking spot rather than relying on bulb age alone.
  • Dimmable fixtures or thermostats: paired with a separate basking heat bulb, these let a keeper manage temperature independently of the fixed-output UVB tube.

Frequently Asked Questions

Do all pet reptiles need a UVB bulb?

No. UVB needs vary widely by species, and some nocturnal or crepuscular species have low or unclear documented requirements. A species-specific care sheet or a reptile veterinarian is the right source for whether a given animal needs supplemental UVB at all, rather than assuming every enclosure needs the same setup.

Can a UVA bulb replace a UVB bulb?

No. Most UVA-only or combination heat bulbs are not rated by their makers to produce meaningful UVB output. Species that need UVB for vitamin D3 synthesis require a bulb specifically rated and tested for UVB output, not simply a bulb that produces visible or UVA light.

How far should a UVB bulb be from the basking spot?

This depends entirely on the bulb and fixture; makers typically publish a recommended distance range for their stated output percentage to be accurate at the basking surface. Mounting closer than stated can risk overexposure, while mounting farther away can leave the animal with far less UVB than the label suggests.

How often should UVB bulbs be replaced?

Many linear and compact UVB bulbs are rated by their makers for a stated effective period, often in the range of six to twelve months, even though they may still glow well past that point. Following the printed replacement schedule is generally recommended over judging by visible brightness, since UVB output is not visible to the human eye.

Does glass or mesh block UVB?

Standard glass blocks the large majority of UVB wavelengths, and many mesh screen types absorb a meaningful portion as well. Enclosures relying on UVB for the animal’s health generally need an open-top setup or a UV-transparent panel positioned per the fixture maker’s guidance.

What signs suggest a reptile’s lighting setup may be inadequate?

Changes in appetite, activity level, or shell or bone development in species prone to metabolic bone disease are reasons to consult a reptile veterinarian promptly rather than adjust lighting based on guesswork. A vet can assess the animal directly and advise on both lighting and any needed dietary or supplement changes.

D
Dũng Trọc Hà Đông
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.